New and Withdrawn Certificates

Browse new and withdrawn certificates by month

AL TILAL STEEL COMPANY LIMITED, JEDDAH, KSA.
BLOCK19, ALKARAMA INDUSTRIAL AREA
PO BOX 104086
AL-KHUMRA
JEDDAH
21331

Saudi Arabia

966 126359000/126086785-86 Ext

magad@tilalsteel.com

AL TILAL STEEL COMPANY LIMITED, JEDDAH, KSA. QR Code

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

BREG EN EPD No. 000618

Environmental Product Declaration (EPD)

Carbon Steel Reinforcing Bar (secondary production route - scrap)
see more...

30/09/2027

ERICO Europe B.V. (a nVent company)
Jules Verneweg 75
Tilburg
Noord Brabant
5015 BG

Netherlands

0808 2344 678

Dennis.Dingemans@nVent.com

ERICO Europe B.V. (a nVent company) QR Code

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

5094

Technical Approval Certification - Reinforcement coupler system

Product Conformity Certification of the products stated on the attached appendix(ces)
see more... Product Conformity Certification of the products stated on the attached appendix(ces)

TA 01B - Couplers and Anchors to EN 1992-1-1: 2004
LENTON C15N Weldable Half couplers tested in accordance with the requirements of CARES Appendix TA1-B for use in accordance with Technical Approval Report TA1-B 5094 Issue 1.

31/12/2024

5090

Technical Approval Certification - Reinforcement coupler system

Product Conformity Certification of the mechanical coupler / anchor systems as stated on the attached appendix(ces)
see more... Product Conformity Certification of the mechanical coupler / anchor systems as stated on the attached appendix(ces)

TA 01F – Couplers for high cycle fatigue and low cycle and static loading
nVent Lenton PM04 Hybrid coupler tested in accordance with and complying with ISO 15835:2018 (Type B coupler) including Factory Production Control (FPC) and additional requirements of CARES Appendix TA1-F, for use in-accordance with Technical Approval Report TA1-F 5090 issue 1. NOTE: This TA1-F approval is not valid for the supply and use of couplers in the UK

31/12/2024

Perfect Channel Sdn Bhd
Lot 8068, Jalan Bedong
Gurun Industrial Estate
Bedong
Kedah
08100

Malaysia

+604 468 8466

mohamad.shahrizal.mt.isa@annjoo.com.my

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

240903

Product Conformity Certification - CS 2

Production of steel reinforcement as stated on the attached appendix(ces)
see more...

31/12/2024

1935

Quality Management System Certification

Quality Management System Certification as stated on the attached appendix(ces)
see more...

30/09/2027

240902

Product Conformity Certification - BS 4449 and/or related products

Production of steel reinforcement as stated on the attached appendix(ces)
see more...

31/12/2024

6028

Product Conformity Certification - SS 560 (Singapore)

Production of steel reinforcement as stated on the attached appendix(ces)
see more...

31/12/2024

PSC Freyssinet (Singapore) Pte Ltd
1 Genting Lane, #03-01
349544

Singapore

+65 8338 9589

vincent.bernier@freyssinet.co.id

PSC Freyssinet (Singapore) Pte Ltd QR Code

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

6027

Certificate of Conformity- In-Situ Post Tensioning Works

Structural components and kits according to RCSB (Requirements for Certification of Specialist Builders: In-Situ Post Tensioning Works) as stated on the attached appendix
see more... Structural components and kits according to RCSB (Requirements for Certification of Specialist Builders: In-Situ Post Tensioning Works) as stated on the attached appendix

SPT-01 - Quality and operations assessment schedule for the Specialist Builders (In-Situ Post-Tensioning Works)
SPT-01 - Supply and Installation of PT Systems in concrete structures Kit Manufacturer: SOLETANCHE FREYSSINET In the plant Z.A. du Monay-Saint Eusèbe F-71210 SAINT EUSÈBE, FranceSPT-01 - Supply and Installation of PT Systems in concrete structures PT Kit Component Manufacturers: As detailed in European Technical Assessment 06/0226 of 09.03.2018 and as audited by their European Notified Body number 1683 Specialist Builder: PSC Freyssinet (Singapore) Pte Ltd 1 Genting Lane, #03-01 349544 Singapore Next office surveillance date: Before 06.09.2025

30/09/2027

Red Sea Steel Co. Ltd
Madinah Road
Gulf Plaza Building 4th Floor, Office 416
P.O. 54118
Jeddah
23218

Saudi Arabia

+966 2 665 3433

allan@redseasteel.sa

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

BREG EN EPD No. 000619

Environmental Product Declaration (EPD)

Carbon Steel Reinforcing Bar (Direct Reduced Iron production route)
see more...

30/09/2027

Saudi Iron and Steel Company (HADEED)
Jubail-HADEED-Admin Building
Al-Jubail Industrial City
Kingdom of Saudi Arabia
10053

Saudi Arabia

+966 (13) 357 4665

vsm12038@hadeed.sabic.com

Saudi Iron and Steel Company (HADEED) QR Code

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

BREG EN EPD. NO. 000567

Environmental Product Declaration (EPD)

Steel bars for the reinforcement of concrete - DRI production route
see more...

30/09/2027

BREG EN EPD. NO. 000566

Environmental Product Declaration (EPD)

Carbon steel feedstock coils - DRI production route
see more...

30/09/2027

BREG EN EPD. NO. 000565

Environmental Product Declaration (EPD)

Hot rolled flat steels - DRI production route
see more...

30/09/2027

Al Ezz Flat Steel - Suez
km 44 Suez/Hurgada Road
Economic Industrial Zone Northwest Gulf of Suez
Suez
144

Egypt

+20 62 3598363

hfahmy@ezzsteel.com

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

240402

Product Conformity Certification - BS 4449 and/or related products

Production of steel reinforcement as stated on the attached appendix(ces)
see more...

31/12/2024

1900

Quality Management System Certification

Quality Management System Certification as stated on the attached appendix(ces)
see more...

25/06/2027

244-CPR-1100

UK Conformity assessed (UKCA)

UK Conformity Assessed (UKCA) - Certificate of Conformity as stated on the attached appendix(ces)
see more... UK Conformity Assessed (UKCA) - Certificate of Conformity as stated on the attached appendix(ces)

UK CPR 02 Hot rolled products of structural steels to BS EN 10025-1: 2004
BS EN 10025 2019 Part 2 Non-alloy structural steels Hot rolled coil grade S235, S275 and S355 classes JR, J0 and J2 in thicknesses 1.2 to 13.0mm and widths 800 to 1600mm.

31/12/2024

Shay Murtagh Precast Ltd.
Raharney, Mullingar
Co. Westmeath
N91 WY91

Ireland

00353 44937 4108

Domas.jurevicius@shaymurtagh.ie

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

240901

Product Conformity Certification - BS 8666 and related activities

Processing of steel reinforcement as stated on the attached appendix(ces)
see more... Processing of steel reinforcement as stated on the attached appendix(ces)

SRC-Appendix 02 Processing and supply of bar, coil and fabric
Processing of steel reinforcement to BS 8666:2020. Stocking and distribution of BS 4449:2005, BS 4482:2005 and BS 4483:2005. Any rebar welded at this location is NOT covered by the CARES Steel for the Reinforcement of Concrete Scheme.

31/12/2024

1934

Quality Management System Certification

Quality Management System Certification as stated on the attached appendix(ces)
see more...

10/09/2027

Concrete Innovators Co. Pte Ltd[Singapore]

1932

Environmental Management System Certification

EMS 28 - Construction
Manufacture of precast and prestressed concrete products

Concrete Innovators Co. Pte Ltd[Singapore]

1933

Occupational Health and Safety Management System Certification 45001

OH&S 28 - Construction
Manufacture of precast & prestressed concrete products

PPI Engineering Systems Pte Ltd[Bukit Batok Cres, Singapore]

1928

Environmental Management System Certification

EMS 28 - Construction
Supply and installation of in-situ post tensioned systems in concrete structures

PPI Engineering Pte Ltd[Singapore]

1930

Environmental Management System Certification

EMS 16 - Concrete, Cement, Lime, Plaster
Manufacture of precast and prestressed concrete products

PPI Engineering Systems Pte Ltd[Bukit Batok Cres, Singapore]

1929

Occupational Health and Safety Management System Certification 45001

OH&S 28 - Construction
Supply and installation of in-situ post tensioned systems in concrete structures

PPI Engineering Pte Ltd[Singapore]

1931

Occupational Health and Safety Management System Certification 45001

OH&S 16 - Concrete, Cement, Lime, Plaster
Manufacture of precast & prestressed concrete products

Al Ittefaq Steel Products Company
PO Box 7600
Dammam
31742

Saudi Arabia

00 966 3 8121 143 ext 306

dowla@altuwairqi.com; certification_team@altuwairq

Al Ittefaq Steel Products Company QR Code

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

240703

Product Conformity Certification - CS 2

Production of steel reinforcement as stated on the attached appendix(ces)
see more...

31/12/2024

CCL Stressing Systems Ltd.
Unit 8
Millennium Drive
Leeds
West Yorkshire
LS11 5BP

United Kingdom

0113 270 1221

swilson@cclint.com

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

4007

Product Conformity Certification - Installation (Australia)

Product Conformity Certificate for Post Tensioning Products and Installation of Post Tensioning Systems stated on the attached appendix(ces)
see more... Product Conformity Certificate for Post Tensioning Products and Installation of Post Tensioning Systems stated on the attached appendix(ces)

APT-01 - Production and supply of prestressing PT Kits
The manufacture and supply of the CCL Stressing XU2 Monostrand Anchor System comprising the XU2 13mm/15mm Anchor Assembly and 13mm/15mm Monostrand Coupler using 12.7mm 1870MPa and 15.2mm 1860MPa strand to the AS/NZS 4672-1:2007 standard for use in flat unbonded post-tension systems. Tested in accordance with AS/NZS 1314:2003 and CARES APT01

31/12/2024

4006

Product Conformity Certification - Installation (Australia)

Product Conformity Certificate for Post Tensioning Products and Installation of Post Tensioning Systems stated on the attached appendix(ces)
see more... Product Conformity Certificate for Post Tensioning Products and Installation of Post Tensioning Systems stated on the attached appendix(ces)

APT-01 - Production and supply of prestressing PT Kits
The manufacture and supply of the CCL Stressing XF Multistrand Bonded Anchor System comprising: XF-10-3-13, XF-20-5-13, XF-30-6-13 XF-10-2-15, XF-20-4-15, XF-30-5-15 using 12.9mm 1840MPa and 15.2mm 1860MPa strand to the AS/NZS 4672-1:2007 standard for use in flat bonded post-tension systems. Tested in accordance with AS/NZS 1314:2003 and CARES APT01

31/12/2024

Concrete Innovators Co. Pte Ltd
42 Pioneer Sector 2
628393

Singapore

68616262

kelvin.tee@coninco.com.sg

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

6025

Quality Management System Certification (Singapore)

Quality Management System Certification as stated on the attached appendix(ces)
see more...

26/08/2027

1932

Environmental Management System Certification (Singapore)

Environmental Management System Certification as stated on the attached appendix(ces)
see more...

26/08/2027

1933

Occupational Health & Safety Management System Certification 45001 (Singapore)

Occupational Health and Safety Management System Certification on the attached appendix(ces)
see more...

26/08/2027

Hoa Phat Dung Quat Steel JSC
Dung Quat Economic Zone
Binh Dong Ward, Binh Son District
Quang Ngai Province

Vietnam

+84 903 276968

maivanha@hoaphat.com.vn

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

211002

Product Conformity Certification - Feedstock for SS 560 (Singapore)

Production of steel reinforcement as stated on the attached appendix(ces)
see more...

31/12/2024

211003

Product Conformity Certification - CS 2

Production of steel reinforcement as stated on the attached appendix(ces)
see more...

31/12/2024

PPI Engineering Pte Ltd
42 Pioneer Sector 2
628393

Singapore

68616262

kelvin.tee@coninco.com.sg

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

6026

Quality Management System Certification (Singapore)

Quality Management System Certification as stated on the attached appendix(ces)
see more...

26/08/2027

1930

Environmental Management System Certification (Singapore)

Environmental Management System Certification as stated on the attached appendix(ces)
see more...

26/08/2027

1931

Occupational Health & Safety Management System Certification 45001 (Singapore)

Occupational Health and Safety Management System Certification on the attached appendix(ces)
see more...

26/08/2027

PPI Engineering Systems Pte Ltd
WCEGA Tower
#06-73, 21 Bukit Batok Cres
658065

Singapore

+6592353825

senthil@coninco.com.sg

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

6003

Quality Management System Certification (Singapore)

Quality Management System Certification as stated on the attached appendix(ces)
see more...

26/08/2027

1928

Environmental Management System Certification (Singapore)

Environmental Management System Certification as stated on the attached appendix(ces)
see more...

26/08/2027

1929

Occupational Health & Safety Management System Certification 45001 (Singapore)

Occupational Health and Safety Management System Certification on the attached appendix(ces)
see more...

26/08/2027

Strabag AG - UK Branch
Wilton Site
Redcar
North Yorkshire
TS10 4RG

United Kingdom

0792 901 3889

svetlana.relton@strabag.com

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

240801

Product Conformity Certification - BS 8666 and related activities

Processing of steel reinforcement as stated on the attached appendix(ces)
see more... Processing of steel reinforcement as stated on the attached appendix(ces)

SRC-Appendix 02 Processing and supply of bar, coil and fabric
Decoiling, cutting and bending of steel reinforcement to BS 8666:2020 Any rebar welded at this location is NOT covered by the CARES Steel for the Reinforcement of Concrete Scheme.

31/12/2024

1927

Quality Management System Certification

Quality Management System Certification as stated on the attached appendix(ces)
see more...

21/08/2027

Express Reinforcements Ltd - SITE CLOSED[Brownhills]

850304

Product Conformity Certification - BS 8666 and related activities

Express Reinforcements Ltd - SITE CLOSED[Brownhills]

1296

Quality Management System Certification

CPAS - ISO 9001:2015 QMS only
Processing of steel reinforcement products

MAKLADA Groupe - SITE CLOSED[Sousse, Tunisia]

140102

Product Conformity Certification - BS 5896 and related products

PT 08 - Prestressing wire and strand
Production of BS 5896 2012 high tensile steel wire and strand as follows: Wire : Plain and indented wire in tensile strengths up to and including 1860 MPa in the size range 4 to 7 mm Strand: Plain 7-wire strand in tensile strengths up to and including 1860 MPa in the size range 9.3 to 15.7mm

MAKLADA Groupe - SITE CLOSED[Sousse, Tunisia]

1374

Quality Management System Certification

CPAS - ISO 9001:2015 QMS only
Production of high tensile steel wire and strand for the prestressing of concrete

Liberty Steel Tredegar - SITE CLOSED[Tredegar, Gwent]

1613

Quality Management System Certification

CPAS - ISO 9001:2015 QMS only
Slitting of hot rolled coil and manufacture of structural hollow section tube.

Stahl Gerlafingen AG (STG) - SITE CLOSED[Solothurn, Switzerland]

1244-CPR-1034

UK Conformity assessed (UKCA)

RA UK CPR 02 Hot rolled products of structural steels to BS EN 10025-1: 2004
UK Conformity Assessed (UKCA) - Certificate of Conformity for the products as stated below: Hot rolled structural steel products for metal building structures or in composite concrete structures according to EN 10025-1 BS EN 10025 Part 2 Non-alloy structural steels up to 150mm thick for the following: S235 JR/J0/J2, S275 JR/JO/J2 and S355 JR/J0/J2

DUFERCO TRAVI E PROFILATI S.p.A - SITE CLOSED[Verbania Italy]

1244-CPR-1056

UK Conformity assessed (UKCA)

RA UK CPR 02 Hot rolled products of structural steels to BS EN 10025-1: 2004
Hot rolled structural steel products for metal building structures or in composite concrete structures according to EN 10025-1 and in accordance with: EN 10025 Part 2 Non-alloy structural steels (in grades S235 JR/J0/J2, S275 JR/J0/J2 and S355 JR/J0/J2/K2), EN 10025 Part 5 Structural steels with improved atmospheric corrosion resistance (in grades S235J0W, S355J0WP and S355J2W) For the following products: Wide flat bars of width 160mm to 400mm and thickness up to 40mm, Equal and unequal leg angles of thickness up to 35mm Taper Flange I sections (IPN) 160mm to 300mm section HEA/B sections from 100 to 200 mm IPE sections from 100 to 300 mm HEM sections up to 100 mm UPN sections from 140 to 300 mm Profiles of thickness up to 12mm

Al Ezz Dekheila Steel Company-Alexandria (S.A.E)
El Dekheila
Alexandria
21537

Egypt

00 20 3 3082220

mhegazy@ezzsteel.com.eg

Al Ezz Dekheila Steel Company-Alexandria (S.A.E) QR Code

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

1895

Sustainable Constructional Steel Scheme_v09

Sustainable Constructional Steel Certification v09 as stated on the attached appendix(ces)
see more...

20/03/2027

1896

Sustainable Constructional Steel Scheme_v09

Production of continuously cast steel slabs; hot rolled flat steels
see more...

20/03/2027

1897

Responsible sourcing of construction products

Responsible Sourcing of Construction Products Certification as stated on the attached appendix(ces)
see more...

20/03/2027

BREG EN EPD No. 000584

Environmental Product Declaration (EPD)

Steel bars for the reinforcement of concrete - DRI production route
see more...

05/07/2027

BREG EN EPD No. 000585

Environmental Product Declaration (EPD)

Hot rolled flat steels - DRI production route
see more...

05/07/2027

Al Rajhi Steel Industries Co. Ltd. Jeddah Western Region
Al Khomra, South Corniche
Jeddah
Al Khomrah
21432

Saudi Arabia

+966 12 2689500

gadalla@rajhisteel.com

Al Rajhi Steel Industries Co. Ltd. Jeddah Western Region QR Code

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

231006

Product Conformity Certification - ASTM A615/A615M

Production of steel reinforcement as stated on the attached appendix(ces)
see more...

31/12/2024

BREG EN EPD No. 000599

Environmental Product Declaration (EPD)

Carbon steel reinforcing bar (Secondary production route - scrap)
see more...

05/07/2027

Aliaga Kiliclar Demir Celik Tesisi
Bozkoy Mahallesi, Sanayi Caddesi, Dış Kapı No:5
Aliaga
Izmir
35800

Turkey

+905374782699

a.cakar@kiliclar.com.tr

Aliaga Kiliclar Demir Celik Tesisi QR Code

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

6021

Product Conformity Certification - SS 560 (Singapore)

Production of steel reinforcement as stated on the attached appendix(ces)
see more...

31/12/2024

240604

Product Conformity Certification - BS 4449 and/or related products

Production of steel reinforcement as stated on the attached appendix(ces)
see more...

31/12/2024

240605

Product Conformity Certification - CS 2

Production of steel reinforcement as stated on the attached appendix(ces)
see more...

31/12/2024

1919

Quality Management System Certification

Quality Management System Certification as stated on the attached appendix(ces)
see more...

06/07/2027

Alliance Steel (M) Sdn Bhd
Kawasan Industri Malaysia
China Kuantan (MCKIP) Jalan Gebeng By Pass
Kuantan
Pahang
26080

Malaysia

+60 95 855 999

binzheng@alliancesteel.com.my

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

BC1-6022

Factory Production Control Certificate to BC1:2023

Hot Rolled Sections as stated on the attached appendix
see more... Hot Rolled Sections as stated on the attached appendix

SFPC - Appendix 01 Factory Production Control Certification of Alternative Structural Steel to BC1 (Singapore)
Factory production control for the manufacture of - 1. (BC1 cl 2.2) Hot rolled sections to BC1 in grades S235 JR and S275 JR Beam: Flange thickness 8.5 to 11.5 mm and mass per metre from 33 to 51 kg/m 2. (BC1 cl 2.2) Hot rolled sections to BC1 in grades S235 JR and S275 JR Column: Flange thicknesses 6.8 to 17.3 mm and mass per metre from 23 to 88.9 kg/m 3. (BC1 cl 2.2) Hot rolled sections to BC1 in grades S355 J0 and S355 JR Beam: Flange thickness 9.7 to 11.5 mm and mass per metre from 45 to 51 kg/m 4. (BC1 cl 2.2) Hot rolled sections to BC1 in grades S355 J0 and S355 JR Column: Flange thicknesses 6.8 to 14.2 mm and mass per metre from 23 to 73.1 kg/m

05/07/2027

Al-Shared Steel
Al Kharj Road
2618 Al Misfat Dist, Building No. 9507
Riyadh
14545

Saudi Arabia

ghunem_44@yahoo.com

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

BREG EN EPD No. 000597

Environmental Product Declaration (EPD)

Carbon steel reinforcing bar (Secondary production route - scrap)
see more...

05/07/2027

Arab Steel Co (ASCO)
Dammam Industrial Area
Dammam

Saudi Arabia

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

BREG EN EPD No. 000601

Environmental Product Declaration (EPD)

Carbon steel feedstock billets manufactured from secondary material (steel scrap) and direct reduced iron (DRI)
see more...

05/07/2027

ARMF Avonmouth Bristol
Port of Bristol - C-Berth Facility
Avonmouth
Bristol
BS11 9DH

United Kingdom

07798 581220

pholland@laingorourke.com

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

240502

Product Conformity Certification - BS 8666 and related activities

Processing of steel reinforcement as stated on the attached appendix(ces)
see more... Processing of steel reinforcement as stated on the attached appendix(ces)

SRC-Appendix 11 Tack Welding (ISO 17660)
Manufacture of pre-assembled MAG/MMA welded fabrications using reinforcing bar in the size range 10 to 40mm to the relevant requirements of BS EN ISO 17660-2:2006 and BS 8548:2017 and CARES Quality and Operations Assessment Schedule 11 using tack joints produced under factory conditions.

SRC-Appendix 12 Semi structural and structural welding (ISO 17660)
Manufacture of pre-assembled MAG/MMA welded fabrications using reinforcing bar in the size range 10 to 40mm to the relevant requirements of BS EN ISO 17660-1:2006 and BS 8548:2017 and CARES Quality and Operations Assessment Schedule 12 using semi-structural joints produced under factory conditions.

31/12/2024

1907

Quality Management System Certification

Quality Management System Certification as stated on the attached appendix(ces)
see more...

17/07/2027

Fosroc International Limited
Drayton Manor Business Park
Coleshill Road
Tamworth
Staffordshire
B78 3XN

United Kingdom

01827 262222

Jonathan.potter@fosroc.com

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

1924

Quality Management System Certification

Quality Management System Certification as stated on the attached appendix(ces)
see more...

06/07/2027

3038

Product Conformity Certification

Product Conformity Certification of the products stated on the attached appendix(ces)
see more...

31/12/2024

Jiangyin Fasten Steel Products Co., Ltd.
No. 3456 Zhencheng Road
Jiangyin
Jiangsu
214400

China

+86 510 86658998

taojianchun@chinafasten.com

Jiangyin Fasten Steel Products Co., Ltd. QR Code

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

BREG EN EPD No. 000600

Environmental Product Declaration (EPD)

High tensile prestressing steel wire and strand (Primary production route - Iron ore)
see more...

05/07/2027

Jiangyin Xicheng Steel Co. Ltd
No.21 Jingtangli Road
Sanlian Village
Lingang Street
Jiangyin City
214442

China

+86 510 86031516

shanshujin@qq.com

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

BREG EN EPD No. 000598

Environmental Product Declaration (EPD)

Carbon steel reinforcing bar (Secondary production route - scrap)
see more...

05/07/2027

Kardemir Celik Sanayi A.S.
Bozkoy Mah. 2 CAD. No:24
Aliaga
Izmir
35800

Turkey

+905337184198

ersin@kar-demir.com.tr

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

240701

Product Conformity Certification - BS 4449 and/or related products

Production of steel reinforcement as stated on the attached appendix(ces)
see more...

31/12/2024

240702

Product Conformity Certification - CS 2

Production of steel reinforcement as stated on the attached appendix(ces)
see more...

31/12/2024

6023

Product Conformity Certification - SS 560 (Singapore)

Production of steel reinforcement as stated on the attached appendix(ces)
see more...

31/12/2024

L M Products Limited
Unit 10, Union Road
Oldbury
Warley
West Midlands
B69 3EX

United Kingdom

0121 552 8622

Alex@lmproducts.co.uk

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

1911

Environmental Management System Certification

Environmental Management System Certification as stated on the attached appendix(ces)
see more...

22/05/2027

1920

Sustainable Constructional Steel Scheme_v09

Sustainable Constructional Steel Certification v09 as stated on the attached appendix(ces)
see more...

28/07/2027

1921

Responsible sourcing of construction products (BRE BES 6001 4.0)

Responsible Sourcing of Construction Products Certification as stated on the attached appendix(ces)
see more...

28/07/2027

Malaysia Steel Works (KL) Bhd (Bukit)
Lot 13039, Jalan Waja, Bukit Raja Industrial Estate
Klang
Selangor
41050

Malaysia

+603 3344 5163

Kytan68@masteel.com.my

Malaysia Steel Works (KL) Bhd (Bukit) QR Code

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

1925

Quality Management System Certification

Quality Management System Certification as stated on the attached appendix(ces)
see more...

28/07/2027

240704

Product Conformity Certification - BS 4449 and/or related products

Production of steel reinforcement as stated on the attached appendix(ces)
see more...

31/12/2024

6024

Product Conformity Certification - SS 560 (Singapore)

Production of steel reinforcement as stated on the attached appendix(ces)
see more...

31/12/2024

240705

Product Conformity Certification - CS 2

Production of steel reinforcement as stated on the attached appendix(ces)
see more...

31/12/2024

Marcegaglia Carbon Steel S.p.A. Casalmaggiore
Via Vanoni, 25
Casalmaggiore
Cremona
26041

Italy

+39 0375 282525

guido.moreschi@marcegaglia.com

Marcegaglia Carbon Steel S.p.A. Casalmaggiore QR Code

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

1244-CPR-1097

UK Conformity assessed (UKCA)

UK Conformity Assessed (UKCA) - Certificate of Conformity as stated on the attached appendix(ces)
see more... UK Conformity Assessed (UKCA) - Certificate of Conformity as stated on the attached appendix(ces)

RA UK CPR 06: Hot finished steel structural hollow sections to BS EN 10210: 2006
Hot finished Structural Hollow Sections of non-alloy steels according to EN10210:2006 of 1.30 to 16mm maximum thickness for the following steel grades: S235JRH, S275J0H, S275J2H, S355J0H, S355J2H, S355MH, S420MH and S460MH for the following type of products: Circular hollow section diameters from 16.75 mm to 406.4 mm Square hollow section from 15x15 mm to 300x300 mm Rectangular hollow section from 20x10 mm to 400x250 mm

31/12/2024

National Steel Company Ltd (Dammam, KSA)
2nd Industrial City
PO Box 7922
Dammam
Eastern Province
31472

Saudi Arabia

+96650 4845906

dowla@altuwairqi.com; certification_team@altuwairq

National Steel Company Ltd (Dammam, KSA) QR Code

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

BREG EN EPD No. 000602

Environmental Product Declaration (EPD)

Carbon steel feedstock billets manufactured from direct reduced iron (DRI)
see more...

05/07/2027

SHIU Wing Steel Limited
Tuen Mun Area 38
Tap Shek Kok
New Territories
HKSAR

Hong Kong

852 2626 9002

kilian@shiuwingsteel.com

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

1926

Quality Management System Certification (HK)

Production of hot rolled steel bar for the reinforcement of concrete as stated on the attached appendix(ces)
see more...

30/07/2027

240706

Product Conformity Certification - CS 2

Production of steel reinforcement as stated on the attached appendix(ces)
see more...

31/12/2024

Silvery Dragon Prestressed Materials Co
62 Shuangliang Road, Shuangyuan Industry Park
Beichen Development Area
Tianjin
300400

China

0086 13820093467

yuxia@yinlong.com

Silvery Dragon Prestressed Materials Co QR Code

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

BREG EN EPD No. 000582

Environmental Product Declaration (EPD)

High tensile prestressing steel wire and strand for the prestressing of concrete (Primary production route - Iron ore)
see more...

05/07/2027

Suez Steel Co. RM1/RM2/RM3
Al Adabyah Road
Suez
P.O.Box 35

Egypt

00201010200212

amr.hefnawy@suezsteel.com

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

1922

Sustainable Constructional Steel Scheme_v09

Sustainable Constructional Steel Certification v09 as stated on the attached appendix(ces)
see more...

21/07/2027

1923

Responsible sourcing of construction products (BRE BES 6001 4.0)

Responsible Sourcing of Construction Products Certification as stated on the attached appendix(ces)
see more...

21/07/2027

TATA Steel Manufacturing (Thailand) Public Company Limited
1 I-7 Road, Maptaphut Industrial Estate
Branch no. 00005
Muang Rayong
Rayong
21150

Thailand

+66 81 669 8485

surasakc@tatasteelthailand.com

TATA Steel Manufacturing (Thailand) Public Company Limited QR Code

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

1918

Quality Management System Certification

Production of continuously cast steel billets. Production of hot rolled steel bar for the reinforcement of concrete.
see more...

25/06/2027

240603

Product Conformity Certification - CS 2

Production of steel reinforcement as stated on the attached appendix(ces)
see more...

31/12/2024

6020

Product Conformity Certification - SS 560 (Singapore)

Production of steel reinforcement as stated on the attached appendix(ces)
see more...

31/12/2024

240602

Product Conformity Certification - BS 4449 and/or related products

Production of steel reinforcement as stated on the attached appendix(ces)
see more...

31/12/2024

BREG EN EPD No. 000603

Environmental Product Declaration (EPD)

Carbon steel reinforcing bar (Secondary production route - scrap)
see more...

05/07/2027

TRASTEEL International SA
VIA Serafino Balestra 10
Lugano
6900

Switzerland

+41 91 910 5318

matteo.delcarratore@trasteel.com

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

1789

Quality Management System Certification

Quality Management System Certification as stated on the attached appendix(ces)
see more... Quality Management System Certification as stated on the attached appendix(ces)

SRC-Appendix 09 Purchase and supply of steel products (Traders)
Purchase and supply of steel products for the reinforcement of concrete in accordance with CARES Steel for the Reinforcement of Concrete Scheme Appendix 9 utilising sub-contracted stocking and transportation facilities.

28/07/2027

Yazici Iron and Steel Co. Inc., Kocaeli (DNA PC Wire and Strand)
Makine İhtisas OSB 6.Cadde No :10
Dilovası
Kocaeli
41455

Turkey

+90 212 253 66 30

hussambastug@dilerhld.com

Yazici Iron and Steel Co. Inc., Kocaeli (DNA PC Wire and Strand) QR Code

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

BREG EN EPD No. 000581

Environmental Product Declaration (EPD)

High tensile prestressing steel wire and strand (Secondary production route - Scrap)
see more...

05/07/2027

The Marble Mosaic Co Ltd - site closed[Weston Super Mare]

1044

Quality Management System Certification

CPAS - ISO 9001:2015 QMS only
Design and Manufacture of Architectural Precast Concrete Components

Teyseer Rebar Contractors - site closed[Doha, Street 43, Qatar]

150701

Product Conformity Certification - BS 8666 and related activities

SRC-Appendix 02 Processing and supply of bar, coil and fabric
Processing of steel reinforcement to BS 8666:2020 Stocking and distribution of BS 4449:2005, BS 4482:2005 and BS 4483:2005

Guney Celik Hasir Ve Demir Mamulleri Sanayi Ticaret A.S. - site closed[Adana, Turkey]

161102

Product Conformity Certification - BS 5896 and related products

PT 08 - Prestressing wire and strand
Production of BS 5896:2012 high tensile steel wire and strand as follows: Wire: Plain wire in tensile strengths up to and including 1860 MPa in the size range 4 to 7mm. Strand: Plain 7-wire strand in tensile strengths up to and including 1860 MPa in the size range 9.3 to 15.7mm.

Guney Celik Hasir Ve Demir Mamulleri Sanayi Ticaret A.S. - site closed[Adana, Turkey]

1481

Quality Management System Certification

CPAS - ISO 9001:2015 QMS only
Production of high tensile steel strand for the prestressing of concrete

Teyseer Rebar Contractors - site closed[Doha, Street 43, Qatar]

1632

Quality Management System Certification

CPAS - ISO 9001:2015 QMS only
Processing of steel reinforcement products.

The Marble Mosaic Co Ltd - site closed[Weston Super Mare]

1791

Environmental Management System Certification

EMS 28 - Construction
The Design and Manufacture of Architectural Precast Concrete Components

Total Construction Supplies Ltd t/a Société d’Armatures Spéciales (SAS) - site closed[Normandie, France]

1800

Quality Management System Certification

CPAS - ISO 9001:2015 QMS only
Processing of steel reinforcement products

Total Construction Supplies Ltd t/a Société d’Armatures Spéciales (SAS) - site closed[Normandie, France]

220302

Product Conformity Certification - BS 8666 and related activities

SRC-Appendix 02 Processing and supply of bar, coil and fabric
Processing of steel reinforcement to BS 8666:2020 Stocking and distribution of BS 4449:2005, BS 4482:2005 and BS 4483:2005

SRC-Appendix 08 Mechanical coupling
Application of Dextra Griptec Swaged Parallel Threaded Coupler to CARES Appendix TA1-B using BS 4449:2005 Grade B500B in the size range 16 to 40mm for use in accordance with Technical Approval report TA1-B 5005

SRC-Appendix 11 Tack Welding (ISO 17660)
Manufacture of pre-assembled MAG welded fabrications using reinforcing bar in the diameter range 10 to 50mm to the relevant requirements of BS EN ISO 17660-2:2006 and BS 8548:2017 and CARES Quality and Operations Assessment Schedule 11 using tack joints produced under factory conditions

SRC-Appendix 12 Semi structural and structural welding (ISO 17660)
Manufacture of pre-assembled MAG welded fabrications using reinforcing bar in the diameter range 20 to 50mm to the relevant requirements of BS EN ISO 17660-1:2006 and BS 8548:2017 and CARES Quality and Operations Assessment Schedule 12 using semi-structural joints produced under factory conditions

Southern Steel Berhad - SITE CLOSED[Malaysia]

220901

Product Conformity Certification - BS 4449 and/or related products

SRC-Appendix 01 Carbon steel bars and coils
BS 4449:2005 Grade B500B Bar 10 to 40mm

Southern Steel Berhad - SITE CLOSED[Malaysia]

1833

Quality Management System Certification

CPAS - ISO 9001:2015 QMS only
Production continuously cast steel billets Production of hot rolled steel bar for the reinforcement of concrete

Southern Steel Berhad - SITE CLOSED[Malaysia]

220903

Product Conformity Certification - CS 2

CPAS 24 - CS2:2012
CS 2:2012 Grade 500B Bar 10 to 40mm

Southern Steel Berhad - SITE CLOSED[Malaysia]

220902

Product Conformity Certification - SS 560 (Singapore)

SSRC - Appendix 01 Weldable reinforcing steel bars, coils and decoiled products
SS 560:2016 Grade B500B Bar 10 to 40mm

Al Ezz Flat Steel - Suez
km 44 Suez/Hurgada Road
Economic Industrial Zone Northwest Gulf of Suez
Suez
144

Egypt

+20 62 3598363

hfahmy@ezzsteel.com

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

240402

Product Conformity Certification - BS 4449 and/or related products

Production of steel reinforcement as stated on the attached appendix(ces)
see more...

31/12/2024

1900

Quality Management System Certification

Quality Management System Certification as stated on the attached appendix(ces)
see more...

25/06/2027

244-CPR-1100

UK Conformity assessed (UKCA)

UK Conformity Assessed (UKCA) - Certificate of Conformity as stated on the attached appendix(ces)
see more... UK Conformity Assessed (UKCA) - Certificate of Conformity as stated on the attached appendix(ces)

UK CPR 02 Hot rolled products of structural steels to BS EN 10025-1: 2004
BS EN 10025 2019 Part 2 Non-alloy structural steels Hot rolled coil grade S235, S275 and S355 classes JR, J0 and J2 in thicknesses 1.2 to 13.0mm and widths 800 to 1600mm.

31/12/2024

BCD Civil Engineering
Clash Industrial Estate
Tralee
Kerry
V92 XV05

Ireland

066 7123888

john@bcdsteel.ie

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

3037

Product Conformity Certification

Production of high tensile steel products as stated on attached appendix(ces)
see more... Production of high tensile steel products as stated on attached appendix(ces)

PT 11 - Processing, stocking and distribution of BS5896 products
Purchase and supply of steel products for post tensioning in accordance with CARES Post Tensioning Scheme Appendix 11 utilising sub-contracted stocking and transportation facilities. Procurement, warehousing and distribution of steel wire and strand to BS5896:2012 utilising sub-contracted warehousing and transportation facilities.

31/12/2024

240601

Product Conformity Certification - BS 8666 and related activities

Processing of stainless steel reinforcement as stated on the attached appendix(ces)
see more... Processing of stainless steel reinforcement as stated on the attached appendix(ces)

SRC-Appendix 02 Processing and supply of bar, coil and fabric
Processing of steel reinforcement to BS 8666:2020. Stocking and distribution of BS 4449:2005, BS 4482:2005 and BS 4483:2005. Any rebar welded at this location is NOT covered by the CARES Steel for the Reinforcement of Concrete Scheme.

31/12/2024

1912

Quality Management System Certification

Quality Management System Certification as stated on the attached appendix(ces)
see more...

25/06/2027

CCL Stressing Systems Ltd.
Unit 8
Millennium Drive
Leeds
West Yorkshire
LS11 5BP

United Kingdom

0113 270 1221

swilson@cclint.com

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

4007

Product Conformity Certification - Installation (Australia)

31/12/2024

4006

Product Conformity Certification - Installation (Australia)

Product Conformity Certificate for Post Tensioning Products and Installation of Post Tensioning Systems stated on the attached appendix(ces)
see more... Product Conformity Certificate for Post Tensioning Products and Installation of Post Tensioning Systems stated on the attached appendix(ces)

APT-01 - Production and supply of prestressing PT Kits
The manufacture and supply of the CCL Stressing XF Multistrand Bonded Anchor System comprising: XF-10-3-13, XF-20-5-13, XF-30-6-13 XF-10-2-15, XF-20-4-15, XF-30-5-15 using 12.9mm 1840MPa and 15.2mm 1860MPa strand to the AS/NZS 4672-1:2007 standard for use in flat bonded post-tension systems. Tested in accordance with AS/NZS 1314:2003 and CARES APT01

31/12/2024

Emirates Steel Industries Co. PJSC. Branch 1
P.O.Box 9291
Industrial City of Abu Dhabi (ICAD-II)
Musaffah
Abu Dhabi
9291

United Arab Emirates

971-2-5072124

Moneim.Tawfik@emiratessteel.com

Emirates Steel Industries Co. PJSC. Branch 1 QR Code

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

240501

Product Conformity Certification - SS 560 (Singapore)

Production of steel reinforcement as stated on the attached appendix(ces)
see more...

31/12/2024

FTB JV - Melton Park
Plots 12 & 13, Melton Commercial Park
Melton Mowbray
Leicestershire
LE14 3JL

United Kingdom

07866973590

GRANT.NICHOLSON@ROGER-BULLIVANT.CO.UK

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

1914

Environmental Management System Certification

Environmental Management System Certification as stated on the attached appendix(ces)
see more...

25/06/2027

1915

Occupational Health and Safety Management System Certification 45001

Occupational Health and Safety Management System Certification on the attached appendix(ces)
see more...

25/06/2027

Leinster Reinforcement
Barrowford Industrial Estate, Monasterevin Road
Athy
Kildare
Kildare

Ireland

00 353 59 8633721

hseq@fbrazilreinforcements.co.uk

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

1892

Environmental Management System Certification

Environmental Management System Certification as stated on the attached appendix(ces)
see more...

10/02/2027

1893

Occupational Health and Safety Management System Certification 45001

Occupational Health and Safety Management System Certification on the attached appendix(ces)
see more...

10/02/2027

1916

Sustainable Constructional Steel Scheme_v09

Sustainable Constructional Steel Certification v09 as stated on the attached appendix(ces)
see more...

25/06/2027

1917

Responsible sourcing of construction products (BRE BES 6001 4.0)

Responsible Sourcing of Construction Products Certification as stated on the attached appendix(ces)
see more...

25/06/2027

TATA Steel Manufacturing (Thailand) Public Company Limited
1 I-7 Road, Maptaphut Industrial Estate
Branch no. 00005
Muang Rayong
Rayong
21150

Thailand

+66 81 669 8485

surasakc@tatasteelthailand.com

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

1918

Quality Management System Certification

Production of continuously cast steel billets. Production of hot rolled steel bar for the reinforcement of concrete.
see more...

25/06/2027

240603

Product Conformity Certification - CS 2

Production of steel reinforcement as stated on the attached appendix(ces)
see more...

31/12/2024

6020

Product Conformity Certification - SS 560 (Singapore)

Production of steel reinforcement as stated on the attached appendix(ces)
see more...

31/12/2024

240602

Product Conformity Certification - BS 4449 and/or related products

Production of steel reinforcement as stated on the attached appendix(ces)
see more...

31/12/2024

BREG EN EPD No. 000603

Environmental Product Declaration (EPD)

Carbon steel reinforcing bar (Secondary production route - scrap)
see more...

05/07/2027

Total Construction Supplies (Processing) Ltd. (Site B) - site closed[Wednesfield, West Midlands]

221108

Product Conformity Certification - BS 8666 and related activities

SRC-Appendix 02 Processing and supply of bar, coil and fabric
Processing of steel reinforcement to BS 8666:2020. Stocking and distribution of BS 4449:2005, BS 4482:2005 and BS 4483:2005. Any rebar welded at this location is NOT covered by the CARES Steel for the Reinforcement of Concrete Scheme.

SRC-Appendix 08 Mechanical coupling
Application of Erico Lenton Taper Threaded standard (A12N) and positional (P13LN and P14LN) mechanical couplers to CARES Appendix TA1-B using BS 4449:2005 grade B500B in the size range 12 to 40mm and BS 4449:2005 grade B500C in the size range 16 to 50mm for use in accordance with Technical Approval report TA1-B 5029. Application of Erico Lenton Taper Threaded standard (A12) and positional (P13 and P14) mechanical couplers to CARES Appendix TA1-B using BS 4449:2005 grade B500B in the size range 12 to 40mm and BS 4449:2005 grade B500C in the size range 16 to 50mm for use in accordance with Technical Approval report TA1-B 5027. Application of Erico Lenton Plus standard (A12N) and positional (P13LN and P14LN) mechanical couplers to CARES Appendix TA1-C using BS 4449:2005 grade B500C in the size range 16 to 50mm for use in accordance with Technical Approval report TA1-C 5030.Application of Erico Lenton Ultimate Standard and Positional mechanical couplers to CARES Appendix TA1-A & TA1-B using BS 4449:2005 grades B500B and B500C in the size range 16 to 40mm for use in accordance with Technical Approval report TA1-A & TA1-B 5085. Application of Dextra Griptec Parallel Threaded Couplers to CARES Appendix TA1-A using BS 4449:2005 grades B500B and B500C in the size range 12 to 40mm for use in accordance with Technical Approval report TA1-A 5051. Application of Dextra Griptec Parallel Threaded Couplers to CARES Appendix TA1-B using BS 4449:2005 grades B500B and B500C in the size range 12 to 50mm for use in accordance with Technical Approval report TA1-B 5005. Application of Dextra Griptec swaged couplers to CARES Appendix TA1-C using BS 4449:2005 Grade B500C in the size range 16 to 40mm for use in accordance with Technical Approval report TA1-C 5014.

Total Construction Supplies (Processing) Ltd. (Site B) - site closed[Wednesfield, West Midlands]

1837

Quality Management System Certification

CPAS - ISO 9001:2015 QMS only
Processing of steel reinforcement products.

Comet Trading SA
Rue du Rhone 100
Geneva
Canton de Geneve
1204

Switzerland

+41 22 732 1111

dorint.gashi@comet-trading.com

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

1906

Quality Management System Certification

Quality Management System Certification as stated on the attached appendix(ces)
see more... Quality Management System Certification as stated on the attached appendix(ces)

SRC-Appendix 09 Purchase and supply of steel products (Traders)
Purchase and supply of steel products for the reinforcement of concrete in accordance with CARES Steel for the Reinforcement of Concrete Scheme Appendix 9 utilising sub-contracted stocking and transportation facilities.

12/05/2027

Dongkuk Steel Incheon Factory
15, Jungbong-daero
Dong-gu
Incheon

Korea, Republic of

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

240403

Product Conformity Certification - BS 4449 and/or related products

Production of steel reinforcement as stated on the attached appendix(ces)
see more...

31/12/2024

6015

Product Conformity Certification - SS 560 (Singapore)

Production of steel reinforcement as stated on the attached appendix(ces)
see more...

31/12/2024

240404

Product Conformity Certification - CS 2

Production of steel reinforcement as stated on the attached appendix(ces)
see more...

31/12/2024

1901

Quality Management System Certification

Quality Management System Certification as stated on the attached appendix(ces)
see more...

12/05/2027

Heiton Steel
Ashfield, Naas Road
Clondalkin
Dublin
D15 W8Y8

Ireland

aidan.butler@heitonsteel.ie

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

1902

Environmental Management System Certification

Environmental Management System Certification as stated on the attached appendix(ces)
see more...

22/05/2027

1903

Occupational Health and Safety Management System Certification 45001

Occupational Health and Safety Management System Certification on the attached appendix(ces)
see more...

22/05/2027

Hy-Ten Ltd
Bridle Road
Bootle
Merseyside
L30 4UG

United Kingdom

0151 525 1745

rkw@hy-ten.co.uk

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

1908

Occupational Health and Safety Management System Certification

Occupational Health and Safety Management System Certification on the attached appendix(ces)
see more...

22/05/2027

Hy-Ten Ltd
Chatham Docks
Chatham
Kent
ME4 4SW

United Kingdom

01634 893487

j.chater@hy-ten.co.uk

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

5093

Technical Approval Certification - Reinforcement coupler system

Product Conformity Certification of the products stated on the attached appendix(ces)
see more...

31/12/2024

L M Products Limited
Unit 10, Union Road
Oldbury
Warley
West Midlands
B69 3EX

United Kingdom

0121 552 8622

Alex@lmproducts.co.uk

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

1911

Environmental Management System Certification

Environmental Management System Certification as stated on the attached appendix(ces)
see more...

22/05/2027

1920

Sustainable Constructional Steel Scheme_v09

Sustainable Constructional Steel Certification v09 as stated on the attached appendix(ces)
see more...

28/07/2027

1921

Responsible sourcing of construction products (BRE BES 6001 4.0)

Responsible Sourcing of Construction Products Certification as stated on the attached appendix(ces)
see more...

28/07/2027

LCP Building Products PTE Ltd
6 Gul Circle
629562

Singapore

+65 68651550

leeyl@lcp.sg

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

6017

Factory Production Control Certificate to BC1:2023

Hollow Sections as stated on the attached appendix
see more... Hollow Sections as stated on the attached appendix

SFPC - Appendix 01 Factory Production Control Certification of Alternative Structural Steel to BC1 (Singapore)
Cold Forming according to AS/NZS 1397-2021. Thickness: 1.2mm - 3.0mm and Profiled Steel Sheets according to JIS G 3302:2022, AS/NZS 1397-2011 & BS EN 10346:2015. Thickness: 0.7mm -1.5mm.

22/05/2027

Liberty Steel, Rotherham Steel and Bar[Rotherham, UK]

1736

Quality Management System Certification

CPAS - ISO 9001:2015 QMS only
Production of continuously cast steel billets Production of hot rolled steel bar for the reinforcement of concrete

Liberty Steel, Rotherham Steel and Bar[Rotherham, UK]

201003

Product Conformity Certification - BS 4449 and/or related products

SRC-Appendix 01 Carbon steel bars and coils
BS 4449:2005 Grade B500C Bar 20 to 50mm

HL Building Materials Pte Ltd (R3 Precast) UEN: 199206970H
MK 20 05143W, 10 Punggol Barat Lane
Punggol
797359

Singapore

+65 85181276

cliffordkanggat@bmg.hla-grp.com

HL Building Materials Pte Ltd (R3 Precast) UEN: 199206970H QR Code

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

6014

Certificate of Conformity - Precast Concrete Products

Specialist Builder Class PCW1A as detailed in attached appendix;
see more... Specialist Builder Class PCW1A as detailed in attached appendix;

SCPAS 01 The minimum quality and operations requirements for the production of structural precast concrete products at a precast factory
Supply of Reinforced Precast and Pre-stressed Concrete Products (All Precast components including PPVC, PBU, PHS, water tank and Pre-stressed planks) according to TRCSB (The Requirements for Certification of Specialist Builder) (Precast Concrete Products). 1. ICPH 5 at MK 20 05143W, 10 Punggol Barat Lane, Singapore 797359 2. HL Manufacturing Industries at Lot 2595/2596 Jalan Perindustrian 3, Kawasan Perindustrian Senai, Malaysia 3. HLBM Tuas Plant 01 at 7A Tuas Avenue, Singapore 638979 Next surveillance date: 01.05.2025 (1 year from date of issue) The layout plan of each fabrication plant is attached.

29/04/2027

Mugafil S.A.
Calle Bidegana 3
Vitoria
Alava
01015

Spain

0034945465646

ibon@mugafil.com

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

240401

Product Conformity Certification - BS 4483 and related products

Production of steel reinforcement fabric and related products as stated on attached appendix(ces)
see more...

31/12/2024

1899

Quality Management System Certification

Quality Management System Certification as stated on the attached appendix(ces)
see more...

15/04/2027

Utracon Structural Systems Pte Ltd
5 Joo Koon Way
628944

Singapore

+65 6415 3078

praveen@utracon.com

Utracon Structural Systems Pte Ltd QR Code

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

6013

Certificate of Conformity- In-Situ Post Tensioning Works

Structural components and kits according to RCSB (Requirements for Certification of Specialist Builders (In-Situ Post Tensioning Works) as stated on the attached appendix
see more... Structural components and kits according to RCSB (Requirements for Certification of Specialist Builders (In-Situ Post Tensioning Works) as stated on the attached appendix

SPT-01 - Quality and operations assessment schedule for the Specialist Builders (In-Situ Post-Tensioning Works)
Kit Manufacturer: DYWIDAG-Systems International GmbH In the plant Max-Planck-Ring 1 40764 Langenfeld GermanyPT Kit Component Manufacturers: As detailed in European Technical Assessment 13/0815 of 19.01.2021 and as audited by their European Notified Body number 1020 Specialist Builder: Utracon Structural Systems Pte Ltd 5 Joo Koon Way 628944 Singapore

24/04/2027

Wai Fong Machinery Pte Ltd
35 Kian Teck Way
628752

Singapore

96831582

jennyng@waifongmachinery.com.sg

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

6011

Product Conformity Certification - BS 8666 and related activities (Singapore)

Processing of steel reinforcement as stated on the attached appendix(ces)
see more...

31/12/2024

6012

Quality Management System Certification (Singapore)

Quality Management System Certification as stated on the attached appendix(ces)
see more...

24/04/2027

Wai Fong Machinery Pte Ltd (Kian Teck Drive)
9 Kian Teck Drive
628822

Singapore

63622970

Wai Fong Machinery Pte Ltd (Kian Teck Drive) QR Code

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

6018

Product Conformity Certification - BS 8666 and related activities (Singapore)

Processing of steel reinforcement as stated on the attached appendix(ces)
see more... Processing of steel reinforcement as stated on the attached appendix(ces)

SSRC - Appendix 04 Application of mechanical couplers to reinforcing steel
Application of Dextra Bartec/Fortec Parallel Threaded Coupler to CARES Appendix TA1-F - ISO 15835: 2018 or SS ISO 15835: 2020 using SS 560: 2016 grade B500B in the size range 13 to 40mm for use in accordance with Technical Approval report TA1-F 5091.

31/12/2024

6019

Quality Management System Certification (Singapore)

Quality Management System Certification as stated on the attached appendix(ces)
see more...

24/04/2027

Shanxi Taigang Stainless Steel Co. Ltd.[Taiyuan, China]

5054

Technical Approval Certification - Reinforcement coupler system

TA 01B - Couplers and Anchors to EN 1992-1-1: 2004
Shanxi Taigang Stainless Steel Standard Couplers tested in accordance with and complying with BS 8597:2015 and additional requirements of CARES Appendix TA1-B for use in-accordance with Technical Approval Report TA1-B 5054 Issue 2

Acemar - site closed[Lucerne, Switzerland]

1760

Quality Management System Certification

SRC-Appendix 09 Purchase and supply of steel products (Traders)
Purchase and supply of steel products for the reinforcement of concrete in accordance with CARES Steel for the Reinforcement of Concrete Scheme Appendix 9 utilising sub-contracted stocking and transportation facilities

Titan Steel Trading Ltd[Bilston West Midlands]

1842

Quality Management System Certification

Al Ezz Dekheila Steel Company-Alexandria (S.A.E)
El Dekheila
Alexandria
21537

Egypt

00 20 3 3082220

mhegazy@ezzsteel.com.eg

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

1895

Sustainable Constructional Steel Scheme_v09

Sustainable Constructional Steel Certification v09 as stated on the attached appendix(ces)
see more...

20/03/2027

1896

Sustainable Constructional Steel Scheme_v09

Production of continuously cast steel slabs; hot rolled flat steels
see more...

20/03/2027

1897

Responsible sourcing of construction products

Responsible Sourcing of Construction Products Certification as stated on the attached appendix(ces)
see more...

20/03/2027

BREG EN EPD No. 000584

Environmental Product Declaration (EPD)

Steel bars for the reinforcement of concrete - DRI production route
see more...

05/07/2027

BREG EN EPD No. 000585

Environmental Product Declaration (EPD)

Hot rolled flat steels - DRI production route
see more...

05/07/2027

Dextra Manufacturing Co Ltd.
191 Chalermprakiat Ro 9 Soi 48
Dokmai, Prawet
Bangkok
10250

Thailand

+66 2 021 3856

sutham@dextragroup.com

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

5091

Technical Approval Certification - Reinforcement coupler system

Product Conformity Certification of the products stated on the attached appendix(ces)
see more... Product Conformity Certification of the products stated on the attached appendix(ces)

TA 01F – Couplers for high cycle fatigue and low cycle and static loading
Bartec / Fortec BF and BV parallel threaded mechanical couplers tested in accordance with and complying with CARES Appendix TA1-F for use in accordance with Technical Approval Report TA1-F 5091 Issue 2. NOTE: This TA1-F approval is not valid for the supply and use of couplers in the UK.

31/12/2024

5092

Technical Approval Certification - Reinforcement coupler system

Product Conformity Certification of the products stated on the attached appendix(ces)
see more... Product Conformity Certification of the products stated on the attached appendix(ces)

TA 01A - Couplers to BS 5400 Part 10: 1980
BARTEC-FORTEC R mechanical couplers tested in accordance with and complying with BS 8597:2015 and additional requirements of CARES Appendix TA1-A for use in accordance with Technical Approval Report TA1-A&B 5092 Issue 1.

TA 01B - Couplers and Anchors to EN 1992-1-1: 2004
BARTEC-FORTEC R mechanical couplers tested in accordance with and complying with CARES Appendix TA1-B for use in accordance with Technical Approval Report TA1-A&B 5092 Issue 1.

31/12/2024

ICDAS Celik Enerji Tersane Ve Ulasim Sanayi A.S.
Degirmencik Koyu
Biga
Canakkale

Turkey

00 90 212 550 4772

mustafa.balci@icdas.com.tr

ICDAS Celik Enerji Tersane Ve Ulasim Sanayi A.S. QR Code

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

231007

Product Conformity Certification - BS 5896 and related products

Production of high tensile steel products as stated on attached appendix(ces)
see more... Production of high tensile steel products as stated on attached appendix(ces)

PT 08 - Prestressing wire and strand
Production of BS 5896:2012 high tensile steel wire as follows: Wire: Plain and indented wire in tensile strengths up to and including 1860 MPa in the size range 5 to 7mm. Strand: Plain 7-wire strand in tensile strengths up to and including 1860 MPa in the size range 9.3 to 15.7mm.

31/12/2024

NatSteel Holdings Pte Ltd
22 Tanjong Kling Road, Gate 3
628048

Singapore

66607807

NKLOON@natsteel.com.sg

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

240301

Product Conformity Certification - CS 2

Production of steel reinforcement as stated on the attached appendix(ces)
see more...

31/12/2024

6007

Product Conformity Certification - SS 560 (Singapore)

Production of steel reinforcement as stated on the attached appendix(ces)
see more... Production of steel reinforcement as stated on the attached appendix(ces)

SSRC - Appendix 01 Weldable reinforcing steel bars, coils and decoiled products
SS 560:2016 Grade B500A Coil 6 to 13mm SS 560:2016 Grade B500B Coil 8 to 16mm SS 560:2016 Grade B500B Bar 10 to 50mm SS 560:2016 Grade B600B Bar 10 to 50mm

31/12/2024

6006

Product Conformity Certification - BS 8666 and related activities (Singapore)

Processing of steel reinforcement as stated on the attached appendix(ces)
see more...

31/12/2024

6008

Product Conformity Certification - SS 561 and related products (Singapore)

Production of steel reinforcement as stated on the attached appendix(ces)
see more...

31/12/2024

6010

Quality Management System Certification (Singapore)

Quality Management System Certification as stated on the attached appendix(ces)
see more... Quality Management System Certification as stated on the attached appendix(ces)

SCMS - ISO 9001:2015 QMS only
(1) Manufacture of rolled steel products for the manufacturing and construction industries. (2) Manufacture of welded steel fabric and hard drawn wire for the reinforcement of concrete. (3) Fabrication of reinforcing steel bars for the construction industry. (4) Fabrication of mechanical splicing systems for steel bars on reinforcement steel bars for the construction industry. (5) Fabrication of cages for the construction industry.Process detail(s)/Location(s) 1. Rolled Steel Products i.) Production of continuously cast steel billers ii.) Production of hot rolled steel bar and coil 2. Import of Wire Rods and Bars for the manufacture of products per the scope of the certification described in (2), (3), (4) and (5) 3. Mechanical Splicing Systems i.) E-Splice ii.) N-Splice 4. The scope of certification for Fabrication of Cages includes the location at No. 9 Jurong Pier Road, Singapore 619161

06/03/2027

240302

Product Conformity Certification - BS 4449 and/or related products

Production of steel reinforcement as stated on the attached appendix(ces)
see more...

31/12/2024

6007

Product Conformity Certification - Feedstock for SS 560 (Singapore)

Production of steel reinforcement as stated on the attached appendix(ces)
see more...

31/12/2024

Reco Civils Ltd
Unit 16
Askew Farm Lane
Grays
Essex
RM17 5XR

United Kingdom

07881593929

ben@recocivils.com

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

240303

Product Conformity Certification - BS 8666 and related activities

Processing of steel reinforcement as stated on the attached appendix(ces)
see more... Processing of steel reinforcement as stated on the attached appendix(ces)

SRC-Appendix 02 Processing and supply of bar, coil and fabric
Processing of steel reinforcement to BS 8666:2020 Stocking and distribution of BS 4449:2005, BS 4482:2005 and BS 4483:2005 Any rebar welded at this location is NOT covered by the CARES Steel for the Reinforcement of Concrete Scheme

31/12/2024

1898

Quality Management System Certification

Quality Management System Certification as stated on the attached appendix(ces)
see more...

28/07/2027

van Merksteijn B.V.
Bedrijvenpark Twente 237
Almelo
KJ
KJ 7602

Netherlands

00 31 546 588 227

booijink@van-merksteijn.nl

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

240304

Product Conformity Certification - BS 4483 and related products

Production of steel reinforcement fabric and related products as stated on attached appendix(ces)
see more...

31/12/2024

1110

Quality Management System Certification

Quality Management System Certification as stated on the attached appendix(ces)
see more...

27/03/2027

Liberty Ostrava a.s. (Site Closed)[Ostrava-Kuncice, Czech Republic]

150402

Product Conformity Certification - BS 4449 and/or related products

SRC-Appendix 01 Carbon steel bars and coils
OTB500/550 bar 16 to 50mm St900/1100 tie bar 15 to 20mm BS 4449 2005 Grade B500C Bar 10 to 50mm GEWI 500 Bar 16 to 50mm

Liberty Ostrava a.s. (Site Closed)[Ostrava-Kuncice, Czech Republic]

1417

Quality Management System Certification

CPAS - ISO 9001:2015 QMS only
Production of continuously cast steel billets Production of hot rolled threaded steel bar Production of hot rolled ribbed steel bar for the reinforcement of concrete

C J O Shea and Company Limited[London UK]

3019

Product Conformity Certification - Installation

PT 02 - Supply and installation of PT systems in concrete structures (excl. Highways)
CARES Appendix PT2: Supply and Installation of Post Tensioning Systems (Slabs) using a Post Tensioning System with a valid ETA under EAD160004 / ETAG013 or CARES Approved System to PT3 and using Prebagged grout which is CARES approved to CARES Appendix PT10 complying with BS EN 447:2007 and execution specification.

Jiangyin Walsin Steel Cable Co. Ltd - Site Closed[Jiangyin City, China]

170201

Product Conformity Certification - BS 5896 and related products

PT 08 - Prestressing wire and strand
Production of BS 5896 2012 plain 7 wire strand in tensile strengths up to and including 1860 MPa in the size range 15.2mm to 15.7mm

Jiangyin Walsin Steel Cable Co. Ltd - Site Closed[Jiangyin City, China]

1492

Quality Management System Certification

CPAS - ISO 9001:2015 QMS only
Production of high tensile steel strand for the prestressing of concrete

C J O Shea and Company Limited[London UK]

1573

Quality Management System Certification

CPAS - ISO 9001:2015 QMS only
Supply and installation of post tensioned systems in concrete structure

Leinster Reinforcement
Barrowford Industrial Estate, Monasterevin Road
Athy
Kildare
Kildare

Ireland

00 353 59 8633721

hseq@fbrazilreinforcements.co.uk

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

1892

Environmental Management System Certification

Environmental Management System Certification as stated on the attached appendix(ces)
see more...

10/02/2027

1893

Occupational Health and Safety Management System Certification 45001

Occupational Health and Safety Management System Certification on the attached appendix(ces)
see more...

10/02/2027

1916

Sustainable Constructional Steel Scheme_v09

Sustainable Constructional Steel Certification v09 as stated on the attached appendix(ces)
see more...

25/06/2027

1917

Responsible sourcing of construction products (BRE BES 6001 4.0)

Responsible Sourcing of Construction Products Certification as stated on the attached appendix(ces)
see more...

25/06/2027

VSC Steel Company Limited
No.17, Tsing Keung Street
Tsing Yi
NT

Hong Kong

2165 5718

jason.lim@vschk.com

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

2703695

Responsible Steel

test
see more...

31/12/2024

Shandong Iron & Steel Group Yongfeng Lingang Corp - SITE CLOSED[Shandong Province, China]

1757

Quality Management System Certification

CPAS - ISO 9001:2015 QMS only
Production of continuously cast steel billets. Production of hot rolled steel bar for the reinforcement of concrete.

Shandong Iron & Steel Group Yongfeng Lingang Corp - SITE CLOSED[Shandong Province, China]

210401

Product Conformity Certification - BS 4449 and/or related products

SRC-Appendix 01 Carbon steel bars and coils
BS 4449:2005 Grade B500B Bar 16 to 50mm

Shandong Iron & Steel Group Yongfeng Lingang Corp - SITE CLOSED[Shandong Province, China]

210403

Product Conformity Certification - CS 2

CPAS 24 - CS2:2012
CS2:2012 Grade 500B Bar 16 to 50mm

SAIL, IISCO Steel Plant - SITE CLOSED[Burnpur, West Bengal]

220401

Product Conformity Certification - BS 4449 and/or related products

SRC-Appendix 01 Carbon steel bars and coils
BS 4449 2005 Grade B500B Bar 8 to 40mm

SAIL, IISCO Steel Plant - SITE CLOSED[Burnpur, West Bengal]

1802

Quality Management System Certification

CPAS - ISO 9001:2015 QMS only
Production of continuously cast steel billets Production of hot rolled steel bar for the reinforcement of concrete

SAIL, IISCO Steel Plant - SITE CLOSED[Burnpur, West Bengal]

220403

Product Conformity Certification - CS 2

CPAS 24 - CS2:2012
CS 2:2012 Grade 500B Bar 8 to 40mm

SAIL, IISCO Steel Plant - SITE CLOSED[Burnpur, West Bengal]

220402

Product Conformity Certification - SS 560 (Singapore)

SSRC - Appendix 01 Weldable reinforcing steel bars, coils and decoiled products
SS 560:2016 Grade B500B Bar 8 to 40mm

JSW Steel Ltd - Dolvi Works - SITE CLOSED[Dolvi, Maharashtra]

221104

Product Conformity Certification - BS 4449 and/or related products

SRC-Appendix 01 Carbon steel bars and coils
BS 4449 2005 Grade B500B Bar 8 to 40mm

JSW Steel Ltd - Dolvi Works - SITE CLOSED[Dolvi, Maharashtra]

1835

Quality Management System Certification

CPAS - ISO 9001:2015 QMS only
Production of continuously cast steel billets and hot rolled steel bars for the reinforcement of concrete

JSW Steel Ltd - Dolvi Works - SITE CLOSED[Dolvi, Maharashtra]

221106

Product Conformity Certification - CS 2

CPAS 24 - CS2:2012
CS2:2012 grade 500B Bar 8 to 40mm

Shandong Iron & Steel Group Yongfeng Lingang Corp - SITE CLOSED[Shandong Province, China]

210402

Product Conformity Certification - SS 560 (Singapore)

SSRC - Appendix 01 Weldable reinforcing steel bars, coils and decoiled products
SS 560:2016 Grade B500B Bar 16 to 50mm

JSW Steel Ltd - Dolvi Works - SITE CLOSED[Dolvi, Maharashtra]

221105

Product Conformity Certification - SS 560 (Singapore)

SSRC - Appendix 01 Weldable reinforcing steel bars, coils and decoiled products
SS 560:2016 Grade B500B Bar 8 to 40mm

VSC Steel Company Limited[Tsing Yi, HK]

2703695

Responsible Steel

Responsible Steel
test

Coen Steel Ltd
Deerpark Industrial Estate
Oranmore
Co. Galway
H91 D9P1

Ireland

+35 391790044

michael.curtin@coensteel.ie

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

1889

Sustainable Constructional Steel Scheme_v09

Sustainable Constructional Steel Certification v09 as stated on the attached appendix(ces)
see more...

08/01/2027

1890

Responsible sourcing of construction products (BRE BES 6001 4.0)

Responsible Sourcing of Construction Products Certification as stated on the attached appendix(ces)
see more...

08/01/2027

Hoa Phat Dung Quat Steel JSC
Dung Quat Economic Zone
Binh Dong Ward, Binh Son District
Quang Ngai Province

Vietnam

+84 903 276968

maivanha@hoaphat.com.vn

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

211002

Product Conformity Certification - Feedstock for SS 560 (Singapore)

Production of steel reinforcement as stated on the attached appendix(ces)
see more...

31/12/2024

211003

Product Conformity Certification - CS 2

Production of steel reinforcement as stated on the attached appendix(ces)
see more...

31/12/2024

James Street Steel
Unit 611 Greenogue Business Park
Rathcoole
Co.Dublin

Ireland

353 1 458 7165

sean@jss.ie

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

1888

Environmental Management System Certification

Environmental Management System Certification as stated on the attached appendix(ces)
see more...

08/01/2027

Japmas Steel Sdn Bhd
Plo 55, Jalan Rumbia 2
Kawasan Perindustrian Tanjung Langsat
Pasir Gudang
Johor
81700

Malaysia

07-3537312

henrylim@lcgjapmas.com

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

BC1-6005

Factory Production Control Certificate to BC1:2023

Hollow Sections as stated on the attached appendix
see more... Hollow Sections as stated on the attached appendix

SFPC - Appendix 01 Factory Production Control Certification of Alternative Structural Steel to BC1 (Singapore)
Cold Formed Welded Structural Hollow Sections of non-alloy steels according to EN10219-1:2006 in grade S275J0H for the following sections: Square sections 38x38mm to 200x200mm in thickness 2.4 to 9.0mm and lengths up to 12000mm. Rectangular sections 50x25mm to 150x250mm in thickness 2.4 to 9.0mm and lengths up to 12000mm. Circular sections in diameter 21.4 to 273mm in thickness 1.2 to 9.0mm and lengths up to 12000mm.

28/01/2027

Jingye Iron and Steel Co., Ltd
Nandian Town
Pingshan County
Shijiazhuang City
Hebei Province
050400

China

0311 82873988

qijiaojiao@jingyesteel.com.cn

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

210404

Product Conformity Certification - CS 2

Production of steel reinforcement as stated on the attached appendix(ces)
see more...

31/12/2024

OPR Services Ltd & Haddon Metals DMCC
168 Fulham Road
London
SW10 9PR

United Kingdom

07702692849

oroe@oprgroup.co.uk

OPR Services Ltd & Haddon Metals DMCC QR Code

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

1887

Quality Management System Certification

Quality Management System Certification as stated on the attached appendix(ces)
see more... Quality Management System Certification as stated on the attached appendix(ces)

SRC-Appendix 09 Purchase and supply of steel products (Traders)
Purchase and supply of steel products for the reinforcement of concrete in accordance with CARES Steel for the Reinforcement of Concrete Scheme Appendix 9 utilising sub-contracted stocking and transportation facilities

08/01/2027

Rashtriya Ispat Nigam Limited [Andhra Pradesh, India]

240103

Product Conformity Certification - CS 2

CPAS 24 - CS2:2012
CS 2:2012 Grade 500B Bar 16 to 36mm

Dextra Manufacturing Co Ltd.
191 Chalermprakiat Ro 9 Soi 48
Dokmai, Prawet
Bangkok
10250

Thailand

+66 2 021 3856

sutham@dextragroup.com

Scan in CARES CLOUD App

Cert No.

Type of Certificate

Scope

Expires

5091

Technical Approval Certification - Reinforcement coupler system

New and Withdrawn Certificates

Oct 2024 (6)

New (6)

Withdrawn (0)

Sep 2024 (8)

New (2)

Withdrawn (6)

Aug 2024 (14)

New (7)

Withdrawn (7)

Jul 2024 (33)

New (21)

Withdrawn (12)

Jun 2024 (9)

New (7)

Withdrawn (2)

May 2024 (9)

New (7)

Withdrawn (2)

Apr 2024 (8)

New (5)

Withdrawn (3)

Mar 2024 (12)

New (6)

Withdrawn (6)

Feb 2024 (15)

New (2)

Withdrawn (13)

Jan 2024 (7)

New (6)

Withdrawn (1)

Dec 2023 (14)

New (4)